Putting the devices into operation
Rack mounting two | To mount two transmitters into a rack using the GA 3 rack adapter: |
transmitters | Place the two transmitters side by side |
Secure the jointing plate 
to the transmitters using six recessed head screws (M 3x6).
Secure the rack mount “ears” 
to the transmitters as described on page 9.
To mount the antennas:
Use remote antennas, if necessary in conjunction with the AC 3 antenna combiner. For more information, visit the ew G3 product pages at www.sennheiser.com.
To mount the transmitters into the rack:
Slide the transmitters into the 19” rack.
Secure the rack mount “ears” to the 19” rack.
Connecting the mains unit
Only use the supplied mains unit. It is designed for the transmitter and ensures safe operation.
Insert the yellow connector of the NT
transmitter.
Pass the cable of the mains unit through the cable grip . Slide the supplied country adapter onto the mains unit .
Plug the mains unit into a wall socket.
The STANDBY button is backlit in red.
The AC 3 antenna combiner incorporates DC distribution to enable simultaneous powering of up to four transmitters via its BNC sockets. These transmitters do not require their individual power supply (see also page 12).
11