Sennheiser EM 300 G3 Overview of the displays, ew300 G3, MHz, MUTE, B.Ch:, SKM300, + 12dB MUTE

Product overview

Overview of the displays

After switch-on, the receiver displays the standard display “Receiver Parameters”. For further illustrations and examples of the different standard displays, please refer to page 25. This standard display displays the operating states of the receiver and provides the most important information on the received transmitter – provided the transmitter supports this function.

    

			PEAK0		B.Ch: 20.24				ew300 G3
	40
			-20			531.375MHz
	20
	30		-10		EQ
	10		-30						SKM300
				-40		+ 12dB MUTE
					P
	RF			AF
		 					   
		Transmitter/
Display		receiver					Meaning
 RF level “RF”		Receiver								Diversity display:
(Radio Frequency)											Antenna input I is active
									40		Antenna input II is active
									30
									20	RF signal level:
									10	Field strength of the received signal
									RF
										Squelch threshold level
Audio level “AF”		Transmitter								Modulation of the transmitter
								PEAK
(Audio Frequency, see										with peak hold function
								0
page 36)								-10		When the display for audio level
								-20
										shows full deflection, the audio level
									-30
									-40	is excessively high. When the trans-
									AF
										mitter is overmodulated frequently
										or for extended periods of time, the
										“PEAK” display is shown inverted.
￿ Frequency bank and		Receiver					Current frequency bank and channel number
channel (see page 35)

10