Putting the receiver into operation





￿Connect the antennas. You have the following options:

– You can connect the supplied rod antennas  to the rear of the receiver (see page 13). In this case, insert the two blanking plugs into the holes of the blanking plate (see diagram above).

– You can use the AM 2 antenna front mount kit (see “Accessories and spare parts” on page 52) and mount the rod antennas to the blanking plate (see diagram below).

 



When using more than one receiver, we recommend connecting remote antennas and, if necessary, using Sennheiser antenna accessories. Fore more information, visit the ew G3 product page at www.sennheiser.com.

15