Sennheiser EM 300 G3 manual 42

Adjustment tips and functions

Advanced Menu

Tune

Sync Settings

Pilot Tone

Warnings

LCD Contrast

Reset

IP-Address

Software Revision

Exit

Devices of the ew 300 G1 series (generation 1) do not support the pilot tone function. Therefore, please observe the following when combining a radio microphone or receiver of the ew 300 G3 series (generation 3) with devices from an earlier evolution wireless generation:

Transmitter Receiver Make sure to ...

w G3/w G2 w G3/w G2 ... activate the pilot tone function on both transmitter and receiver.

w G3	w G1	... deactivate the pilot tone function on
		the ew 300	G3 transmitter.
w G1	w G3	... deactivate the pilot tone function on
		the ew 300	G3 receiver.

Activating/deactivating warnings

Via the “Warnings” menu item, you can activate or deactivate different warning messages.

	Warning message
	with color change
	on the current
Setting	standard display				Trigger
“AF PEAK”					Audio overmodulation
			PEAK
	40		0
		20	-20	AF PEAK
		30	-10
		10	-30
			-40
		RF	AF
“Low RF Signal”			PEAK		RF signal is weak
	40		0	Low
	30		-20
			-10	RF Signal
	10		-30
	20
			-40
		RF	AF
“RF Mute”			PEAK		RF signal is too weak or
	40		0		no RF signal
	30		-10	RF Mute
	20		-20
	10		-30
			-40
		RF	AF
“TX Mute”			PEAK		Transmitter is muted or
	40		0		no pilot tone
		30	-10	TX Mute
		20	-20
		10	-30
			-40
		RF	AF
“RX Mute”			PEAK		Receiver is muted
	40		0
		30	-10	RX Mute
		20	-20
		10	-30
			-40
		RF
			AF
“Low Battery”			PEAK		Charge status of the transmitter
	40		0		battery/the BA 2015 accupack
		30	-10	Low Battery
		20	-20
		10	-30		is critical
			-40
		RF	AF

41