Putting the receiver into operation

Rack mounting two receivers

To mount the receiver into a 19” rack:

￿Slide the receiver with the mounted blanking plate into the 19” rack.

￿Secure the rack mount “ears”  to the 19” rack.

If you are using the supplied rod antennas:

￿Align the antennas in a V-shape to obtain the best possible reception.

When rack mounting two receivers side by side, you can only front mount the antennas when using the ASA 1 antenna splitter in conjunction with the AM 2 antenna front mount kit and an additional GA 3 rack adapter (see “Accessories and spare parts” on page 52).

We recommend using remote antennas.

To mount the receivers into a rack using the GA 3 rack adapter:

￿Place the two receivers side by side upside-down onto a flat surface.





￿Secure the jointing plate to the receivers using six recessed head screws (M 3x6).

￿Secure the rack mount “ears”  to the receivers as described on page 12.

16