Sennheiser EM 300 G3 Muting the audio signal

Using the receiver

To mute the audio signal:

When one of the standard displays is shown on the display panel, press the STANDBY button.

“RX Mute On?” appears on the display panel.

Press the jog dial.

The audio signal is muted. “RX Mute” flashes in alternation with the current standard display. The display panel is backlit in red.

To unmute the audio signal:

Press the STANDBY button.

“RX Mute Off?” appears on the display panel.

Press the jog dial.

The muting is canceled and the display backlighting changes from red to orange again.

If “RX Mute On?” or “RX Mute Off?” appears on the display panel but you do not wish to change the status of the muting function:

Press the STANDBY button.

The status of the muting function remains unchanged and the current standard display appears.