Synchronizing transmitters with receivers

 

Synchronizing transmitters with receivers –

 

multi-channel operation

 

In order to ensure an intermodulation-free transmission, use the

 

same frequency bank for all transmission links.

Network operation

Combined with ew 300 G3 transmitters, ew 300 G3 receivers can form

 

transmission links that can be used in multi-channel systems.

 

In multi-channel operation, the receivers are remote controlled via a PC

 

running the “Wireless Systems Manager” (WSM) software.

 

For further information on downloading the software, visit the ew G3

 

product page on our website at www.sennheiser.com.

 

Advantages of controlling the receivers via the “Wireless Systems

 

Manager” (WSM) software:

 

• Detailed overview of all receiving channels

WSM

• Remote control of all receivers in the network

•Combination of receivers of different frequency ranges (see page 6).

￿Connect the receivers in a network (see page 18).

￿Launch the “Wireless Systems Manager” (WSM) software.

￿To scan for unused receiving frequencies and to configure the receivers, proceed as described in the instruction manual of the “Wireless Systems Manager” (WSM) software.

￿Set the corresponding transmitter to the selected frequency bank and to the selected channel either by synchronizing the transmitter with the receiver (see page 22) or by setting the frequency bank and the channel manually (see the instruction manual of the transmitter).

Your multi-channel system is now set up.

Operation

If you want to set up a multi-channel system without using the WSM,

without network

proceed as follows:

 

￿ Switch off all transmitters of your system that are to be automatically

 

configured.

 

Channels used by switched-on transmitters are displayed as “used”.

45