Sennheiser EM 3732 manual Mounting the antennas to the front of the rack

Putting the receiver into operation

Mounting the antennas to the front of the rack

When rack mounting the receiver, you require the GA 3030 AM antenna mount (available as an accessory) to mount the antenna connections to the front of the rack. The GA 3030 AM antenna mount consists of:

y2 BNC extension cables (screw-in BNC socket W to BNC connector [)

y2 antenna holders Z

y4 screws

y2 washers Y

y2 nuts X

￿Unsecure the rack mount “ears” 1 from the rack.

￿Guide the BNC cables through the holes in the rack mount “ears” as shown in the diagram on the left.

￿Screw the antenna holders Z to the BNC sockets Yusing the supplied washers X and nuts W.

￿Secure the antenna holders Zto the handles of the receiver using two of the supplied screws respectively.

￿Connect the two BNC connectors [to the BNC sockets O and Rat the rear of the receiver.

￿Slide the receiver into the 19’’ rack.

￿Resecure the rack mount “ears” 1 to the rack.

￿Connect the antennas \ to the BNC sockets W.

￿Align the antennas upwards in a V-shape.

15