Remote monitoring of | 4.1.7 |
transmitter battery |
|
DIVERSITY
A 
B
MENU
Y |
N |
SET
ESC
MANIPULATION
Choose the option to indicate the condition of the transmitter battery (see ch. 4.1.1).
DepressSET
to select the display mode for the indication of the battery condition.
NOTA BENE
This function is only operative if SK 50 UHF, SK 250 UHF or SKM 5000 UHF transmitters are used.
DepressESC
to return to the previous level.
This key also serves to stop data entry in case of errors.
FUNCTION |
| DISPLAY (RX) |
The EM 1046 RX receiver module distinguishes between two types of power supply: the transmitters can be powered by batteries or rechargeable batteries.
If primary cells are used, the display indicates the remaining capacity in three steps. A
If you connect transmitters other than SK 50 UHF, SK 250 UHF or SKM 5000 UHF, the display indicates
CONDITION OF PRIMARY CELLS:
Capacity of 100 %
Capacity of about 70 %
Capacity of about 30 %, the display starts blinking.
Attention !
Replace the transmitter batteries.
The remaining capacity only suffices for about half an hour!
EM 203, Publ. 10/94 engl | 32 |
