System configurations

4.1.7

and identification data

 

DIVERSITY

A B

MENU

Y

N

SET

ESC

MANIPULATION

 

FUNCTION

 

DISPLAY (RX)

Choose the option to set the display (ch. 4.1.1).

DepressSET

to return to the display mode.

The receiver specifications are stored in every single module:

The display indicates the

MODEL/SERIES

EM 1046-U-L

UHF ( 450 - 790 MHz)

EM 1046-U-H

UHF ( 630 - 960 MHz)

Use

Y

SERIAL NUMBER OF THE MODULE

or N

to select the parameter to be indicated.

Scrolling is stopped by keeping

SET

depressed.

NOTA BENE

Depress

ESC

to return to the previous level.

This key also serves to stop data entry in case of errors.

Every module has a serial number to facilitate its identification. The serial number cannot be changed.

FREQUENCY RANGE OF THE MODULE

The display shows the standard frequencies or frequency ranges.

SOFTWARE VERSION

Shows the version of the software used.

HARDWARE VERSION OF THE MODULE

1Version of the analog section (information for Sennheiser's Service Department or Sennheiser distributors)

2Version of the digital section (information for Sennheiser's Service Department or Sennheiser distributors)

CUSTOMER-SPECIFIC TEXT

It is entered by Sennheiser electronic KG or your Sennheiser distributor, if ordered.

EM 203, Publ. 10/94 engl

31

Page 31
Image 31
Sennheiser FT-906A20, FT-906B20, FT-905A, FT-902S35, FT-902S15 manual System configurations Identification data, EM 1046-U-H