Using the transmitter

When carrying out the Sync function, the transmitter’s current frequency bank and channel setting as well as the receiver parameters adjusted via the “Sync Settings” submenu are transferred to the EK 2000 IEM receiver via the infra-red interface.

Carrying out an Easy Setup Sync or a Sync function

The following assumes that you are using the Easy Setup Sync function for setting up a multi- channel system. You can also you the Easy Setup Sync function for establishing a transmission link between one transmitter and one EK 2000 IEM receiver.

Easy Setup Sync

Sync

￿ Switch all transmitters and one diversity

￿ Switch your transmitter and your

receiver on.

diversity receiver on.

￿On all transmitters, call up the “Easy ￿ Press the button  on the trans-

Setup” menu item.

mitter.

 

The text “Easy Setup Sync” and the

The

icon appears on the display

icon appear on the display panels of the

panels of the transmitter.

transmitters.

 

 

The RF signal of the transmitters is auto-

 

 

matically deactivated.

 

 

￿ Use your diversity receiver to perform a

–

 

frequency preset scan and select a

 

 

channel within a frequency bank with a

 

 

sufficient number of unused channels (see

 

 

the instruction manual of the receiver).

 

 



 

￿Place the infra-red interface of the ￿ Place the infra-red interface of the

receiver (see the instruction manual of

receiver (see the instruction manual of

the receiver) in front of the infra-red

the receiver) in front of the infra-red

interface  of the first transmitter.

interface  of your transmitter.

The next unused frequency preset is

The parameters adjusted via the “Sync

transferred from the receiver to the

Settings” menu item are transferred

transmitter.

from the transmitter to the receiver.

As soon as the transfer is completed, the

In addition, the current frequency bank

display panel of the transmitter displays

and channel setting is transferred.

the numbers of the transferred fre-

When the transfer is completed, “ ”

quency bank and channel.

appears on the display panel of the trans-

Please note that the transmitter does not

mitter. The transmitter then switches

automatically store the frequency bank

back to the standard display.

and channel setting.

The transferred parameters are automat-

 

 

ically adjusted and stored by the receiver.

 

The transmission link between trans-

 

mitter and receiver is now established.

16