Using the transmitter

Easy Setup Sync

Sync

￿ Place the infra-red interface of the diver-

–

sity receiver in front of the infra-red

 

interfaces of the remaining transmitters,

 

one after the other.

 

￿ Store the frequency bank and channel

–

setting by pressing the jog dial on your

 

transmitters. You can carry out the Sync

 

function (see right-hand column) at a

 

later time to establish a transmission link

 

between transmitters and receivers.

 

OR:

￿Immediately synchronize your receivers with your transmitters by carrying out the Sync function (see right-hand column).

This establishes a transmission link between transmitters and receivers.

The icon in the left lower corner of the transmitter display indicates that the

Sync function can be carried out.

–

To cancel the transfer:

￿ Press the STANDBY button on the trans- mitter.

“” appears on the display panel of the transmitter. “” also appears if no suitable receiver was found.

17