Using the operating menu
When the standard display is shown on the display panel, you can get into the main menu by pressing the jog dial. The extended menu “Advanced Menu” and the other menus can be accessed via the corresponding menu items.
Display | Function of the menu item |
Main menu “Menu” |
|
|
|
Sensitivity | Adjusts the input sensitivity |
Easy Setup | Deactivates the RF signal and activates Easy Setup Sync (see page 15) |
Mode | Selects mono or stereo operation |
Frequency Preset | Changes the frequency bank and the channel |
Name | Enters the transmitter name |
Equalizer | Changes the frequency response of the output signal using a graphic |
| equalizer |
AutoLock | Activates/deactivates the automatic lock mode |
Advanced | Calls up the extended menu “Advanced Menu” |
Exit | Exits the operating menu and returns to the standard display |
Extended menu “Advanced Menu” | |
|
|
Tune | Sets the transmission frequencies for the frequency banks “U1” to |
| “U6” |
| Special function: Sets a channel and a transmission frequency for the |
| frequency banks “U1” to “U6”: |
| Select this menu item and call it up by pressing the jog dial until |
| the channel selection appears. |
Sync Settings | Adjusts the receiver parameters to be transferred to the receiver and |
| activates/deactivates the transfer (see table on page 15) |
RF Power | Adjusts the transmission power |
Warnings | Calls up the submenu “Warnings” |
LCD Contrast | Adjusts the contrast of the display panel |
Reset | Resets the transmitter |
Adjusts the IP address of the transmitter | |
Software Revision | Displays the current software revision |
Exit | Exits the extended menu “Advanced Menu” and returns to the main |
| menu |
|
|
Submenu “Warnings”
Activates/deactivates warnings (color change and warning messages):
AF Peak | Audio overmodulation |
RF Mute | RF signal is deactivated |
Exit | Exits the submenu “Warnings” and returns to the extended menu |
| “Advanced Menu” |
|
|
19