Examples

The following command changes the password for the user JohnDoe:

Sentry: set user password johndoe<Enter>

Password: <Enter>

Verify Password: <Enter>

Setting user access level privileges

The Set User Access command sets the access level privileges for a user. The Sentry has four defined access privilege levels; Admin, User, On-Only and View-Only. For more information on user access levels, see Changing a user’s access privilege level: on page 17.

The administrator may also grant administrative privileges to other user accounts allowing the Sentry to have more than one administrative-level user.

NOTE: You cannot remove administrative privileges from the Admn user unless another user has already been given administrative access level privileges created.

To set the access level privilege for a user:

At the Sentry: prompt, type set user access, followed by admin or user, optionally followed by a username and press Enter.

Examples

The following command sets the user access level for JohnDoe to Admin:

Sentry: set user access admin johndoe<Enter>

The following command sets the user access level for JaneDoe to User:

Sentry: set user access user janedoe<Enter>

Granting and removing input load viewing privileges

The Set User Envmon command grants or removes input load viewing privileges to/from a general or view-only user.

NOTE: This command also grants or removes viewing privileges for the status of the optional Equipment Cabinet Environmental Manager and attached sensors. See the Equipment Cabinet Environmental Manager Installation and Operations manual for more information.

To grant or remove input load viewing privileges for a user:

At the Sentry: prompt, type set user envmon followed by on or off, optionally followed by a username and press Enter.

Example

The following command grants input load privileges to the user JohnDoe:

Sentry: set user envmon on johndoe<Enter>

Displaying the access privilege levels

The List Users command displays all defined users with their access privilege level.

To display user access privilege levels:

At the Sentry: prompt, type list users and press Enter.

Example

The following command displays all users with their access privilege level:

Sentry: list users<Enter>

 

User

Privilege

Environmental

Name

Level

Monitoring

JOHNDOE

Admin

Allowed

JANEDOE

User

Allowed

JOSEYDOE

On-Only

Not Allowed

JOEDOE

View-Only

Not Allowed

Sentry PT22

Operations • 29

Installation and Operations Manual