Displaying outlet information

The Show Outlets command displays information about all outlets. This information includes:

Sequencing and reboot timer values

Descriptive outlet name, if applicable

Outlet wakeup state setting

To display outlet information:

At the Sentry: prompt, type show outlets and press Enter.

Example

The following command displays all outlet information:

Sentry: show outlets<Enter>

 

Outlet

Outlet

Wakeup

Post-On

ID

Name

State

Delay (seconds)

.A1

DataServer_1

Off

90

.B1

WebServer_1

On

0

.C1

FileServer_1

On

0

.D1

 

On

0

Outlet Options:

 

 

Sequence Interval:

2 seconds

 

Reboot Delay:

15 seconds

 

Group Administration

Creating a group name

The Create Group command creates a new group name.

To create a group name:

At the Sentry: prompt, type create group, optionally followed by a descriptive name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces are not allowed. Group names are not case sensitive). Press Enter.

Example

The following command creates group name ServerGroup_1:

Sentry: create group ServerGroup_1<Enter>

Removing a group name

The Remove Group command removes a group name.

To remove a group name:

At the Sentry: prompt, type remove group, optionally followed by a username. Press Enter.

Example

The following command removes group name ServerGroup_1:

Sentry: remove group ServerGroup_1<Enter>

Adding an outlet to a group

The Add OutletToGroup command adds an outlet to a group. To add more than one outlet, but not all outlets, you must use multiple Add OutletToGroup commands.

To add an outlet to a group:

At the Sentry: prompt, type add outlettogroup, optionally followed by an outlet name and group name. Press Enter, or

Type add OutletToGroup, followed by all and the group name. Press Enter.

Examples

The following commands uses absolute outlet names to add outlets A1 and B1 to group name ServerGroup_1:

Sentry:add OutletToGroup .a1 ServerGroup_1<Enter>

Sentry:add OutletToGroup .b1 ServerGroup_1<Enter>

Sentry PT22

Operations • 33

Installation and Operations Manual