Setting the filename to be uploaded

The FTP Filename command sets the filename of the firmware file to be uploaded.

To set the FTP filename:

At the Sentry: prompt, type set ftp filename, followed by the firmware filename and press Enter.

Example

The following command sets the FTP filename to snb_s50a.bin:

Sentry: set ftp filename snb_s50a.bin<Enter>

Setting the filepath for the file to be uploaded

The FTP Filepath command sets the filepath for the firmware file to be uploaded.

To set the FTP filepath:

At the Sentry: prompt, type set ftp filepath, followed by the filepath and press Enter.

Example

The following command sets the FTP filepath to ftp://Sentry:

Sentry: set ftp filepath ftp://sentry<Enter>

Displaying FTP configuration information

The Show FTP command displays all FTP configuration information.

FTP Host IP address

FTP Host username and password

Firmware filepath and filename

To display FTP configuration information:

At the Sentry: prompt, type show ftp and press Enter.

Example

The following command displays the FTP configuration information:

Sentry: show ftp<Enter>

FTP Configuration

Host IP Address: 12.34.56.99

Username: guest

Password: OpenSesame

Directory: ftp://sentry

Filename: snb_s52a.bin

SNTP Administration

Sentry supports the use of a network time service to provide a synchronized time reference.

Setting the SNTP server address

The Set SNTP command is used to set the primary and secondary SNTP server addresses.

To set the SNTP server address:

At the Sentry: prompt, type set sntp, followed by primary or secondary, and the SNTP server IP address. Press Enter.

Example

The following command set the primary SNTP server address to 204.152.184.72:

Sentry: set sntp primary 204.152.184.72<Enter>

42 • Operations

Sentry PT22

 

Installation and Operations Manual