Displaying trap configuration information
The Show Traps command displays information about all traps.
To display trap information:
At the Sentry: prompt, type show traps and press Enter.
Example
The following command requests trap configuration information:
Sentry: show traps <Enter>
Tower trap configuration:
Tower | Tower | Status |
|
|
ID | Name | Trap |
|
|
.A | Florida_HQ_1 | ON |
|
|
More (Y/es N/o): y |
|
|
| |
Input feed trap configuration: |
|
|
| |
Input | Input | Status | Load | High |
Feed ID | Feed Name | Trap | Trap | Thresh |
.AA | HQ_1_Infeed_A | ON | ON | 255 A |
.AB | HQ_1_Infeed_B | ON | ON | 255 A |
.AC | HQ_1_Infeed_C | ON | ON | 255 A |
.AD | HQ_1_Infeed_D | ON | ON | 255 A |
More (Y/es N/o): y |
|
|
| |
Outlet trap | configuration: |
|
|
|
Outlet | Outlet | Change | Status |
|
ID | Name | Trap | Trap |
|
.AA1 | DataServer_1 | OFF | ON |
|
.AB1 | WebServer_1 | OFF | ON |
|
.AC1 | FileServer_1 | OFF | ON |
|
.AD1 |
| OFF | ON |
|
Sentry PT22 | Advanced Operations • 53 |
Installation and Operations Manual |
|