Appendix E:
Sentry Ramp-Hold Shorthand Instructions
After you press the keys in the left column, the message to the right will appear.
KEYS TO PRESS | DISPLAY | COMMENTS |
PROGRAM AND FIRE THE KILN.
Apply power to kiln
4
1, 2, 3, or 4
ENTER
Rate
ENTER
Temperature
ENTER
Hold time (0 if none)
IdLE | Press Enter if IdLE does not appear. |
|
|
USER | Enter program number. |
1Program number appears.
RA 1 | Enter rate of segment 1. |
|
|
0200 | Rate appears. |
|
|
°F 1 | Enter temperature of segment 1. |
|
|
2000 | Temperature appears. |
|
|
Hd 1 | Next, enter hold time. |
00.00Hold time appears.
Repeat for other segments. Enter rate of 0 for 1st segment not needed.
ENTERIdLE
ENTERSTRT
The kiln is ready to fire. Kiln is now firing.
SELECT AND FIRE A STORED USER PROGRAM.
Apply power to kiln | IdLE | Press Enter if IdLE does not appear. |
|
|
|
4 | USEr | Select a program number. |
|
|
|
1, 2, 3, or 4 | 1 | Displays the number you selected. |
|
|
|
ENTER | RA 1 |
|
|
|
|
STOP | IdLE | Selected program is ready to fire. |
|
|
|
ENTER | STRT |
|
Kiln is now firing. (Use Program Review by pressing 6.)
31
