Servis-Rhino FM84A manual Tractor Horsepower, Tractor 3-Point Hitch

OPERATION

2.3 Tractor Horsepower

The horsepower required to operate the mower depends on many factors including the vegetation to be cut, terrain condition, operator experience, and condition of the mower and tractor. For most mowing condition, the FM84A mower requires a tractor with at least 30HP. Operating the mower with a tractor that does not have adequate power may damage the tractor engine.

2.4 Tractor 3-Point Hitch

The tractor 3-point hitch must be rated to lift at least 815 lbs. if attaching a FM84A.

This mower is designed to be mounted on tractors with a CAT I hitch. Refer to the tractor operator’s manual for the category of the tractor being used. If the hitch does not conform toASAE CAT I dimensions, the mower may not fit or raise properly. Consult an authorized dealer for possible modification procedures to mount non-conforming hitches.

Use the correct hitch pins for the hitch category being used. For a Cat I hitch, 7/8” lower and 3/4” upper diameter hitch pins.

Lower Hitch Pins

CAT I Implement / Hitch Specifications
Width from outside to outside A-frame	26-7/8"
Quick Hitch width inside lug to lug	27-1/8"
Height from bottom hitch pin to top pin	18"
Lower pin diameter	7/8"
Upper pin diameter	3/4”
Linch Pin diameter	15/32"

Upper Pin Location Top Link Attaches Here

OPERATION

FM84A 09/03 Operation Section 4-7

© 2004 Alamo Group Inc.