Servis-Rhino manual OPERATION RHINO FM84A FINISHING MOWER, Operation Instructions

OPERATION

OPERATION

RHINO FM84A FINISHING MOWER

OPERATION INSTRUCTIONS

Rhino FM84A finishing mowers are manufactured with quality material by skilled workers. These mowers are designed to cut grass, weeds, small brush and other vegetative material up to 1” diameter in areas such as pastures, industrial areas, and roadsides. The mower is equipped with protective deflectors and/or chain guards to prevent objects being thrown from the mower by the blades, however, no shielding is 100% effective. All shields, guards, deflectors, and chains equipped on the unit must be maintained on the mower in good operational condition.

It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the mower, tractor, or a thrown object. Do not operate the mower if passersby, pets, livestock, or property are directly in front or to the rear of the unit.

This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper mower use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in explaining the operation of a rotary mower and are not specificto a FM84A mower. Some pictures may show shields removed for purposes of clarity. NEVER OPERATE this implement without all shields in place and in good operational condition. The operator must be familiar with the mower and tractor operation and all associated safety practices before operating the mower and tractor. Proper operation of the mower, as detailed in this manual, will help ensure years of safe and satisfactory use of the mower.

IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation.

	MOWER SPECIFICATION		4-4
(1)	OPERATOR REQUIREMENTS		4-5
(2)	TRACTOR REQUIREMENTS		4-6
	(2.1)	ROPS and Seatbelt	4-6
	(2.2)	Tractor Safety Devices	4-6
	(2.3)	Tractor Horsepower	4-7
	(2.4)	3-Point Hitch	4-7
	(2.5)	Front End Weight	4-8
	(2.6)	Power Take Off (PTO)	4-8
(3)	GETTING ON AND OFF THE TRACTOR		4-9
	(3.1)	Boarding the Tractor	4-9
	(3.2)	Dismounting the Tractor	4-9
(4)	STARTING THE TRACTOR		4-10
(5)	CONNECTING THE MOWER TO THE TRACTOR		4-11
	(5.1)	Connecting the Mower	4-11
(6)	SETTING THE MOWER		4-12
	(6.1)	Setting Mowing Height-Lift Type	4-13

FM84A 09/03 Operation Section 4-2

© 2004 Alamo Group Inc.