OPERATION
DANGER! All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox Shields, PTO integral shields, and the Retractable Door Shields should be used and maintained in good working condition. All safety devices should be inspected carefully at least daily for missing or broken components. Missing, broken, or worn items must be replaced at once to reduce the possibility of injury or death from thrown objects, entanglement, or blade contact.
¾Ensure the Axle Arm Weldment bolts are properly installed and tightened.
¾Ensure the snapper pin is installed correctly on the fork and wheel assembly
¾Inspect all bolts and screws and tighten to the recommended torque.
¾Inspect the condition of the drive belts.
¾Ensure the slip clutch is properly adjusted and the friction plates are not frozen together. Reference the Maintenance Section for proper slip clutch maintenance.
¾Ensure the slip clutch shield and drive belt shields are in place and in good repair.
¾Ensure the tractor PTO master shield is in place, lowered and in good condition.
¾Inspect the oil level in all gearboxes . A low oil level is a warning sign that the gearbox may be cracked or its seal is damaged and needs to be replaced.
¾Ensure all gearbox vents are in place and free from clogs.
Axle Arm Bolt
Retaining Pin
OPERATION
FM84A 09/03 | Operation Section |
© 2004 Alamo Group Inc.
