
OPERATION
9.4 Driving the Tractor and Mower
Start off driving at a slow speed and gradually increase your speed while maintaining complete control of the tractor and mower. Moving slowly at first will also prevent the tractor from rearing up and loss of steering control. The tractor should never be operated at speeds that cannot be safely handled or which will prevent the operator from stopping quickly during an emergency. If the power steering or engine ceases operating, stop the tractor immediately as the tractor will be difficult to control. If the tractor becomes stuck or the tires are frozen to the ground, reverse the tractor out to prevent overturning.
Perform turns with the tractor and mower at slow speeds to determine how the tractor with the mower handles a turn. Determine the safe operating speed to maintain proper control of the tractor when making turns. When turning with an attached rear implement, the overall length of the working unit is greatly increased. Allow additional clearance for the mower to swing when turning.
WARNING! | Be particularly careful when transporting the Mower with the Tractor. Turn curves or go |
|
| ||
| up hills only at a low speed and using a gradual steering angle. Rear mounted Implements | |
| move the center of gravity to the rear and remove weight from the front wheels. Make | |
| certain, by adding front ballast if necessary, to maintain at least 20% of the Tractor’s | |
| weight on the front wheels to prevent Tractor rearing up, loss of steering control, and | |
| possible Tractor | |
| steering control, which could result in property damage or possible injury. Do not transport | |
| the Mower unless the Tractor | |
| position. Dropping the Mower during transport can cause serious damage to the Tractor | |
| and/or Mower, and possibly cause the operator or others to be injured or killed. |
|
WARNING! | Mow at the speed that you can safely operate and control the tractor and mower. Safe mowing | |
| speed depends on terrain condition and grass type, density, and height of cut. Normal ground speed | |
| range is from 0 to 5 mph. Use slow mowing speeds when operating on or near steep slopes, ditches, | |
| ||
|
FM84A 09/03 | Operation Section |
© 2004 Alamo Group Inc.