
OPERATION
OPERATION
9.2 Brake and Differential Lock Setting
Make sure the tractor brakes are in good operating condition. Tractor brakes can be set to operate independently allowing single rear wheel braking action or locked together to provide simultaneous rear wheel braking. FOR MOST DRIVING AND MOWING CONDITIONS, THE BRAKE PEDALS SHOULD BE LOCKED TOGETHER TO PROVIDE THE MOST EFFECTIVE BRAKING ACTION.
WARNING! Be aware of the operating conditions. Do not operate the Tractor with weak or faulty brakes. When operating down a hill or on wet or rain slick roads, the braking distance increases; use extreme care and reduce your speed in these conditions. When operating in traffic, always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and watch out for the other guy.
Always disengage the tractor differential lock when turning. When engaged the differential lock will prevent or limit the tractor from turning. During normal cutting conditions, locking the differential provides no benefit and should not be used.
9.3 Raising the Mower |
| |
Clearance | ||
Using the tractor | ||
| ||
hydraulic remote |
| |
the mower high enough to clear all ground obstacles. |
| |
When raising the mower, make sure all connection |
| |
points are securely attached and at least 1” clearance |
| |
is maintained between the driveline and the deck. If |
| |
necessary, place an upper lift stop on the |
| |
control lever to limit the height the mower can be raised |
| |
to avoid driveline damage. |
| |
|
|
FM84A 09/03 | Operation Section |
© 2004 Alamo Group Inc.