OPERATION
OPERATION
8.1 Tractor Pre-Operation Inspection/Service
Refer to the tractor operator’s manual to ensure a complete
¾Tire condition/air pressure
¾Wheel lug bolts
¾Steering linkage
¾PTO shield
¾SMV sign is clean and visible
¾Tractor’s lights are clean and functional
¾Tractor Seat belt is in good condition
¾Tractor cab or ROPS is in good condition
¾ROPS is in the raised position
¾No tractor oil leaks
¾Radiator free of debris
¾Engine oil level and condition
¾Engine coolant level and condition
¾Power brake fluid level
¾Power steering fluid level
¾Fuel condition and level
¾Sufficient lubrication at all lube points
¾Air filter condition
8.2 Mower Pre-Operation Inspection/Service
Before each mower use, a complete inspection and service is required to ensure the mower is in a good and safe working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the mower is ready for operation, conduct the following.
¾Perform scheduled lubrication as detailed in the maintenance section.
¾Ensure all decals are in place and legible.
¾Ensure the driveline is securely attached to tractor. Make sure the driveline yoke locking collar is securely seated in the grooves of the PTO shaft by pushing and pulling the yoke several times.
¾Inspect that the
FM84A 09/03 | Operation Section |
© 2004 Alamo Group Inc.
