OPERATION

OPERATION

Shorten the driveline profiles as follows:

•Remove the driveline from the tractor.

•Position the mower (Lift and Semi-Mount Type - Raise and lower/ Pull Type - Turn sharply) to the point with the shortest distance between the tractor PTO shaft and cutter gearbox. Shut down the tractor and securely block the mower in this position.

•Pull driveline apart and reattach yoke to PTO shaft.

•Hold driveline sections parallel to one another and measure back 1” from yoke of each shaft and place mark on opposite section. Cut this length off with a saw.

•Round off all sharp edges and debur.

•Thoroughly grease then reinstall the driveline.

•Recheck for proper operation.

Engagement Check Procedure

•With the driveline attached, position the mower to the point where the telescoping driveline is at its maximum extension. Completely shut down the tractor and secure in position.

•Mark the inner driveline shield 1/8” from the end of the outer shield.

•Disconnect the driveline from the tractor and separate the two driveline halves.

•Measure the distance from the mark to the end of the inner profile. This length is the amount the driveline profiles were engaged.

•If the engaged length is less than 12” for a CV driveline and less than 6” for a non-CV driveline, the shaft is

considered too short and should be replaced with a longer shaft. Consult an authorized dealer to purchase the required driveline length.

NOTE: When raising the mower, at least 1” clearance must be maintained between the driveline and the mower deck. If necessary, place an upper lift stop on the 3-point hitch control lever to limit the height the mower can be raised. OPS-R-0005-G

Turbo 120 01/11

Operation Section 4-18

© 2011 Alamo Group Inc.

Page 127 Page 129
Page 128
Image 128
Servis-Rhino TURBO120 manual Shorten the driveline profiles as follows, Engagement Check Procedure
Page 127 Page 129

TURBO120 specifications

The Servis-Rhino TURBO120 is a cutting-edge rotary cutter designed for agricultural and landscaping applications, renowned for its durability, efficiency, and advanced features. This robust mower is a top choice for professionals and landowners alike, seeking superior performance in tough terrain.

Equipped with a powerful engine, the TURBO120 boasts a high horsepower rating that allows it to tackle dense grass, heavy brush, and overgrown vegetation with ease. The machine’s cutting width of 120 inches enables it to cover large areas quickly, making it an ideal solution for large properties and commercial landscaping tasks.

One of the standout features of the TURBO120 is its heavy-duty construction. Built with a rugged steel frame, this rotary cutter is designed to withstand the rigors of challenging environments. Its reinforced cutting deck both enhances structural integrity and improves the longevity of the machine, minimizing wear and tear even in demanding conditions.

Technologically, the TURBO120 incorporates a unique blade configuration that optimizes cutting efficiency. The rotary blades are designed for maximum cutting performance, ensuring a clean and even cut every time. The machine also features a slip clutch system that protects the drive components, allowing the cutter to handle difficult materials without damage.

User comfort and safety are paramount in the design of the TURBO120. The intuitive controls are easy to operate, allowing users to adjust settings and manage the mower effortlessly. Safety features, including robust guarding around the cutting blades, ensure that users can operate the machine confidently and securely.

The Servis-Rhino TURBO120 is also versatile, with the ability to be attached to various tractors and equipment. Its compatibility with multiple PTO (Power Take-Off) systems enhances its utility, making it a valuable tool for anyone managing large properties, including farmers, landscapers, and maintenance crews.

In summary, the Servis-Rhino TURBO120 presents an impressive blend of power, efficiency, and user-friendly features. Its heavy-duty construction and advanced technologies make it suitable for a wide range of cutting tasks, while safety and comfort considerations ensure an enjoyable and secure mowing experience. Whether dealing with grass or heavy brush, the TURBO120 delivers top-notch performance that professionals can rely on for all their land management needs.
Top Page Image Contents