Perform Maintenance Safely

Hydraulic System Hazards

The hydraulic system is under pressure whenever the engine is operating and may hold pressure even after the engine is shut off. Cycle all hydraulic controls including the auxiliary hydraulic control after the engine is shut down. Relieve trapped pressure in the lines after the attachments are shut down and resting on the ground.

During inspection of the hydraulic system:

—Wait for fluid to cool before disconnecting the lines. Hot hydraulic fluid can cause SEVERE BURNS.

—Do not use your hand to check for leaks. Instead, use a piece of cardboard or paper to search for leaks.

—Wear appropriate eye protection. Hydraulic fluid can cause permanent eye injury.

WARNING! Hydraulic fluid under pressure can penetrate the skin or eyes and cause serious injury, blindness or death. Fluid leaks under pressure may not be visible.

Use a piece of cardboard or wood to find leaks, not your hand. Wear a face shield or safety goggles for eye protection. If fluid is injected into the skin, it must be removed within a few hours by medical personnel familiar with this type of injury.

When venting or filling the hydraulic system, loosen the filler cap slowly and remove it gradually.

Never reset any relief valve in the hydraulic system to a pressure higher than recommended by the manufacturer.

Wear

Eye Protection

High Pressure

Fluid Can Inject

Into the Body

Perform Maintenance Safely

Electrical System Hazards

Before working on the electrical system, disconnect the battery cable(s).

—Remove the battery negative (-) cable(s) first.

—When reconnecting the battery, connect the battery negative (-) cable(s) last.

The liquid in batteries contains acid, which is a POISON and can cause SEVERE CHEMICAL BURNS.

Avoid Injury

—Wear a face shield to prevent contact with your eyes.

—Wear chemical-resistant gloves and clothing to keep electrolyte off your skin and regular clothing.

WARNING! Electrolyte will damage eyes or skin on contact. Always wear a face shield to avoid electrolyte in eyes. If electrolyte contacts eyes, flush immediately with clean water and get medical attention.

Wear chemical-resistant gloves and protective clothing to keep electrolyte off skin. If electrolyte contacts exposed skin or clothing, wash off immediately

with clean water. If electrolyte is ingested, seek medical attention immediately. NEVER give fluids that would induce vomiting.

Wear

Face Protection

Wear

Protective

Clothing

23

Page 62 Page 64
Page 63
Image 63
Servis-Rhino TURBO120 manual Hydraulic System Hazards, Electrical System Hazards, Avoid Injury
Page 62 Page 64

TURBO120 specifications

The Servis-Rhino TURBO120 is a cutting-edge rotary cutter designed for agricultural and landscaping applications, renowned for its durability, efficiency, and advanced features. This robust mower is a top choice for professionals and landowners alike, seeking superior performance in tough terrain.

Equipped with a powerful engine, the TURBO120 boasts a high horsepower rating that allows it to tackle dense grass, heavy brush, and overgrown vegetation with ease. The machine’s cutting width of 120 inches enables it to cover large areas quickly, making it an ideal solution for large properties and commercial landscaping tasks.

One of the standout features of the TURBO120 is its heavy-duty construction. Built with a rugged steel frame, this rotary cutter is designed to withstand the rigors of challenging environments. Its reinforced cutting deck both enhances structural integrity and improves the longevity of the machine, minimizing wear and tear even in demanding conditions.

Technologically, the TURBO120 incorporates a unique blade configuration that optimizes cutting efficiency. The rotary blades are designed for maximum cutting performance, ensuring a clean and even cut every time. The machine also features a slip clutch system that protects the drive components, allowing the cutter to handle difficult materials without damage.

User comfort and safety are paramount in the design of the TURBO120. The intuitive controls are easy to operate, allowing users to adjust settings and manage the mower effortlessly. Safety features, including robust guarding around the cutting blades, ensure that users can operate the machine confidently and securely.

The Servis-Rhino TURBO120 is also versatile, with the ability to be attached to various tractors and equipment. Its compatibility with multiple PTO (Power Take-Off) systems enhances its utility, making it a valuable tool for anyone managing large properties, including farmers, landscapers, and maintenance crews.

In summary, the Servis-Rhino TURBO120 presents an impressive blend of power, efficiency, and user-friendly features. Its heavy-duty construction and advanced technologies make it suitable for a wide range of cutting tasks, while safety and comfort considerations ensure an enjoyable and secure mowing experience. Whether dealing with grass or heavy brush, the TURBO120 delivers top-notch performance that professionals can rely on for all their land management needs.
Top Page Image Contents