ASSEMBLY

CONTROL RODS

Attach the two level-lift control rods to the lower lugs on tongue and to lugs on the rear axle tube using pins, washers and cotter pins. Note: The adjusting nuts on control rods should be to rear of machine and should always be adjusted with equal tension on both rods. Figure Asm-R-0289 & Asm-R-0290

DRIVELINE CLAMP CONE YOKE

Loosen the yoke clamp cone with a 11/16” (17mm) wrench and remove the cone from yoke. Slide yoke onto the shaft and align hole for clamping cone with annular groove of gearbox shaft. Reinstall cone and tighten (75 lb.-ft. torque). Push and pull the driveline to ensure it is securely attached to the shaft. Regularly check the driveline yoke to ensure a tight connection. To remove the yoke, remove the connecting cone and pull yoke off the shaft. If the cone cannot be easily removed by hand, drive it out from the other side using a hammer and punch.

NOTE: The clamping cone is serviced only as a complete assembly. Do not attempt to disassemble the clamping cone.

Turbo120 01/11

Assembly Section 3-5

© 2011 Alamo Group Inc.

ASSEMBLY

Page 103
Image 103
Servis-Rhino TURBO120 manual Control Rods, Driveline Clamp Cone Yoke

TURBO120 specifications

The Servis-Rhino TURBO120 is a cutting-edge rotary cutter designed for agricultural and landscaping applications, renowned for its durability, efficiency, and advanced features. This robust mower is a top choice for professionals and landowners alike, seeking superior performance in tough terrain.

Equipped with a powerful engine, the TURBO120 boasts a high horsepower rating that allows it to tackle dense grass, heavy brush, and overgrown vegetation with ease. The machine’s cutting width of 120 inches enables it to cover large areas quickly, making it an ideal solution for large properties and commercial landscaping tasks.

One of the standout features of the TURBO120 is its heavy-duty construction. Built with a rugged steel frame, this rotary cutter is designed to withstand the rigors of challenging environments. Its reinforced cutting deck both enhances structural integrity and improves the longevity of the machine, minimizing wear and tear even in demanding conditions.

Technologically, the TURBO120 incorporates a unique blade configuration that optimizes cutting efficiency. The rotary blades are designed for maximum cutting performance, ensuring a clean and even cut every time. The machine also features a slip clutch system that protects the drive components, allowing the cutter to handle difficult materials without damage.

User comfort and safety are paramount in the design of the TURBO120. The intuitive controls are easy to operate, allowing users to adjust settings and manage the mower effortlessly. Safety features, including robust guarding around the cutting blades, ensure that users can operate the machine confidently and securely.

The Servis-Rhino TURBO120 is also versatile, with the ability to be attached to various tractors and equipment. Its compatibility with multiple PTO (Power Take-Off) systems enhances its utility, making it a valuable tool for anyone managing large properties, including farmers, landscapers, and maintenance crews.

In summary, the Servis-Rhino TURBO120 presents an impressive blend of power, efficiency, and user-friendly features. Its heavy-duty construction and advanced technologies make it suitable for a wide range of cutting tasks, while safety and comfort considerations ensure an enjoyable and secure mowing experience. Whether dealing with grass or heavy brush, the TURBO120 delivers top-notch performance that professionals can rely on for all their land management needs.