OPERATION

Blade Bolts Working Loose

Bolts not tightened.

 

Bolt hole elongated or oversized.

 

Locknut worn out.

Gearbox Noisy

Low Lubricant.

 

Rough gears.

 

Worn Bearing.

Gearbox Leaking

Damaged Oil Seal.

 

Bent Shaft.

 

Oil Seal Race rough.

 

Oil Seal installed wrong.

 

Oil Seal not sealing in the housing.

 

Oil level too high.

 

Gasket damaged.

 

Bolts loose.

 

Sand hole in casting.

Streaking Conditions

Conditions too wet for cutting.

 

Blades unable to cut that part of

 

grass pressed down by path of

 

tractor tires.

 

Dull blades.

 

Height of cutter lower at rear or

 

front.

Gearbox Overheating

Low on lubricant.

 

Improper type lubricant.

 

Excessive trash build-up around

 

gearbox.

 

Bearing or gears set up improperly.

Shear Pin Shears

Tractor PTO not being run at

Excessively

540 RPM.

 

Heavy Material.

 

Not using proper pin.

 

PTO engaged at high engine RPM

 

Cutting in rocky conditions

 

Blade carrier RPM too high.

 

Blades not properly heat treated.

Tighten Bolts to 300 ft./lbs.

Replace Blade Carrier.

Replace Locknut.

Check lubricant level.

Run in or change Gears.

Replace Bearing.

Replace Seal.

Replace Oil Seal and Shaft. Replace Shaft or repair Race. Replace Seal.

Replace Seal or use a sealant on O.D. of Seal.

Drain oil to proper level. Replace Gasket. Tighten Bolts.

Replace castings or gearbox.

Allow grass to dry before cutting. Slow ground speed of tractor but keep engine running at full PTO wpm. Lowering the cutting height may help. Sharpen or replace blades.

See Cutting Height Instructions.

Fill to level plug.

Replace with proper lubricant. Remove trash.

Consult your Dealer.

Run at 540 RPM.

Reduce ground speed. Raise cutting height.

Replace only with recommended shear pin.

Idle engine to engage PTO Increase cutting height. Check gearbox ratios. Consult your Dealer.

OPERATION

Turbo 120 01/11

Operation Section 4-49

© 2011 Alamo Group Inc.

Page 159
Image 159
Servis-Rhino TURBO120 manual Turbo 120 01/11 Operation Section

TURBO120 specifications

The Servis-Rhino TURBO120 is a cutting-edge rotary cutter designed for agricultural and landscaping applications, renowned for its durability, efficiency, and advanced features. This robust mower is a top choice for professionals and landowners alike, seeking superior performance in tough terrain.

Equipped with a powerful engine, the TURBO120 boasts a high horsepower rating that allows it to tackle dense grass, heavy brush, and overgrown vegetation with ease. The machine’s cutting width of 120 inches enables it to cover large areas quickly, making it an ideal solution for large properties and commercial landscaping tasks.

One of the standout features of the TURBO120 is its heavy-duty construction. Built with a rugged steel frame, this rotary cutter is designed to withstand the rigors of challenging environments. Its reinforced cutting deck both enhances structural integrity and improves the longevity of the machine, minimizing wear and tear even in demanding conditions.

Technologically, the TURBO120 incorporates a unique blade configuration that optimizes cutting efficiency. The rotary blades are designed for maximum cutting performance, ensuring a clean and even cut every time. The machine also features a slip clutch system that protects the drive components, allowing the cutter to handle difficult materials without damage.

User comfort and safety are paramount in the design of the TURBO120. The intuitive controls are easy to operate, allowing users to adjust settings and manage the mower effortlessly. Safety features, including robust guarding around the cutting blades, ensure that users can operate the machine confidently and securely.

The Servis-Rhino TURBO120 is also versatile, with the ability to be attached to various tractors and equipment. Its compatibility with multiple PTO (Power Take-Off) systems enhances its utility, making it a valuable tool for anyone managing large properties, including farmers, landscapers, and maintenance crews.

In summary, the Servis-Rhino TURBO120 presents an impressive blend of power, efficiency, and user-friendly features. Its heavy-duty construction and advanced technologies make it suitable for a wide range of cutting tasks, while safety and comfort considerations ensure an enjoyable and secure mowing experience. Whether dealing with grass or heavy brush, the TURBO120 delivers top-notch performance that professionals can rely on for all their land management needs.