To the Owner/Operator/Dealer

This Operator's Manual is an integral part of the safe operation of this machine and must be maintained with the implement at all times. A Manual canister is provided on the implement where this manual can be properly stored. If you lose or damage this manual a free replacement manual can be obtained from an authorized Rhino dealer or by down loading the manual from the Rhino website www.servis-rhino.com

BEFORE YOU START!! READ, UNDERSTAND, and FOLLOW the information provided in this manual, the AEM Mower Safety manual and the tractor operator's manual carefully to learn how to operate and service your machine properly. Failure to do so could result in personal injury to you and bystanders. All implements with moving parts are potentially hazardous. Every effort has been made to ensure that the machine is safe but operators must avoid engaging in unsafe practices and follow the written instructions provided. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.

SAFETY FIRST. Completely read and understand the safety section of this manual before operating this equipment. Do not allow anyone to operate this equipment who has not fully read and understood this manual. Contact your Dealer to explain any instructions that you do not fully understand.

The care you give your Rhino Implement will greatly determine your satisfaction with its performance and its service life. Carefully read and follow the instructions in this manual to provide you with a thorough understanding of your new implement and its intended use and service requirements.

All references made in this manual to right, left, front, rear, top or bottom are as viewed facing the direction of forward travel with the implement properly attached to the tractor.

Replacement Parts information is located in a separate Parts Manual. Rhino mowers use balanced and matched system components for blade carriers, blades, cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Rhino specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of "will fit" parts may reduce mower performance, void warranties, and present a safety hazard. Use genuine Rhino mower parts for economy and safety.

For future reference, record your Rhino product model number and serial number.

Dealer

 

Telephone

 

Model Number

 

 

 

 

 

 

 

Owner

 

Purchase Date:

 

Serial Number

 

 

 

 

 

 

 

Page 1 Page 3
Page 2
Image 2
Servis-Rhino TURBO120 manual To the Owner/Operator/Dealer
Page 1 Page 3

TURBO120 specifications

The Servis-Rhino TURBO120 is a cutting-edge rotary cutter designed for agricultural and landscaping applications, renowned for its durability, efficiency, and advanced features. This robust mower is a top choice for professionals and landowners alike, seeking superior performance in tough terrain.

Equipped with a powerful engine, the TURBO120 boasts a high horsepower rating that allows it to tackle dense grass, heavy brush, and overgrown vegetation with ease. The machine’s cutting width of 120 inches enables it to cover large areas quickly, making it an ideal solution for large properties and commercial landscaping tasks.

One of the standout features of the TURBO120 is its heavy-duty construction. Built with a rugged steel frame, this rotary cutter is designed to withstand the rigors of challenging environments. Its reinforced cutting deck both enhances structural integrity and improves the longevity of the machine, minimizing wear and tear even in demanding conditions.

Technologically, the TURBO120 incorporates a unique blade configuration that optimizes cutting efficiency. The rotary blades are designed for maximum cutting performance, ensuring a clean and even cut every time. The machine also features a slip clutch system that protects the drive components, allowing the cutter to handle difficult materials without damage.

User comfort and safety are paramount in the design of the TURBO120. The intuitive controls are easy to operate, allowing users to adjust settings and manage the mower effortlessly. Safety features, including robust guarding around the cutting blades, ensure that users can operate the machine confidently and securely.

The Servis-Rhino TURBO120 is also versatile, with the ability to be attached to various tractors and equipment. Its compatibility with multiple PTO (Power Take-Off) systems enhances its utility, making it a valuable tool for anyone managing large properties, including farmers, landscapers, and maintenance crews.

In summary, the Servis-Rhino TURBO120 presents an impressive blend of power, efficiency, and user-friendly features. Its heavy-duty construction and advanced technologies make it suitable for a wide range of cutting tasks, while safety and comfort considerations ensure an enjoyable and secure mowing experience. Whether dealing with grass or heavy brush, the TURBO120 delivers top-notch performance that professionals can rely on for all their land management needs.
Top Page Image Contents