3

Making copies

NORMAL COPYING

This copier has two document input stations - a single pass feeder (SPF) for automatic document feeding and an original table for manual handling of documents. The SPF is designed to hold up to 30 originals measuring from 5-1/2" x 8-1/2" to 8-1/2" x 14" and weighing from 14 to 23 lbs.

1

Ensure that paper of the desired size is set in the paper tray. See page 13, LOADING

COPY PAPER. When copying onto paper larger than 8-1/2" x 11" size, pull out the

 

 

paper output tray extension.

2

Turn the power switch on.

 

3

Place the original(s) face up in the document feeder tray or face down on the original

table.

 

A. When using the SPF:

(1)Make sure that no original is left on the original table.

(2)Adjust the original guides to the size of originals.

(3)Set the originals face up in the document feeder tray.

Before feeding originals in the document feeder tray, be sure to remove any staples or paper clips from them.

Before placing curled or wavy originals into the document feeding tray, be

sure to flatten them. If not, original misfeeds may result.

The SPF () indicator on the operation panel will light up. If this indicator

does not light up, the originals are not properly set or the SPF is not properly closed.

Badly damaged originals may misfeed in the SPF. It is recommended that such originals be copied from the original table.

Special originals such as transparency film should not be fed through the SPF, but should be placed directly on the original table.

Original face up

18

Page 20
Image 20
Sharp AL-1451 operation manual Normal Copying, When using the SPF