Sharp AL-1451 operation manual Bypass Feed special paper

3

Making copies

REDUCTION/ENLARGEMENT/ZOOM

3	Set the number of copies using the copy quantity ( , ) keys and press the print
	(	) key.

BYPASS FEED (special paper)

The single-sheet manual bypass can be used to feed standard paper, transparency film, labels, and other special purpose papers measuring from 3-1/2" x 5-1/2" to 8-1/2" x 14" and in the weight range of 14 to 34.5 lbs. can be used in this tray. (For paper weighing from 28 to 34.5 lbs., 8-1/2" x 11" is the maximum size.)

1	Place the original(s) face up in the document feeder tray or face down on the original
	table.

The original image must be smaller than the paper or media for copying.

If the original image is bigger than the paper or media, this may cause smudges on the edges of the copies.

2	Set the paper guides to the copy paper width. Insert a single sheet of copy paper
	(print face down) into the feed slot of the manual bypass.
	Copying will begin automatically.

●Paper must be fed narrow side into the feed slot.

●Transparency film, labels, and other special purpose papers must be fed

individually.

● When copying onto transparency film, remove each copy promptly. Do not let copies stack up.

●When loading an envelopes, make sure that it is straight and flat.

Print face

22