NORMAL COPYING

5

Press the print (

) key.

 

 

To display the number of copies made in a continuous run, press the left

copy quantity key.

To stop copying in the middle of a run, press the clear () key. Copying will stop and the number in the display will be reset to “0”.

3

Making copies

Stream feeding mode

The stream feeding mode allows easy operation of continuous copying from the SPF.

If the stream feeding mode has been enabled using user program No.4, the SPF () indicator will blink approximately 5 seconds after printing of all copies from the SPF is complete. While this indicator is blinking, any new originals placed in the document feeder tray will be fed and

copied automatically. If the stream feeding mode has been disabled, the print () key must be pressed each time the originals are set even immediately after completion of a copy run from the SPF. The default setting of the stream feeding mode is “ON”. See page 25, USER PROGRAMS.

EXPOSURE ADJUSTMENT/PHOTO COPYING

Copy density adjustment is not required for most originals in the automatic exposure mode. To adjust the copy density manually or to copy photographs, the exposure level can be adjusted in five steps manually.

1

Set the original and check the copy paper size.

 

 

 

 

Press the exposure mode selector key to select the manual (

) mode or photo

2

( ) mode.

 

 

 

20

Page 22
Image 22
Sharp AL-1451 operation manual Exposure ADJUSTMENT/PHOTO Copying, Stream feeding mode