USER MAINTENANCE
Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure.
|
| 1 | Turn the power switch off. | |
|
|
|
| |
|
|
| Open the side cover while pressing the side cover open button. | |
|
| 2 | ||
|
|
|
| |
|
|
| Take the charger cleaner out by holding the tab. | |
|
| 3 | ||
|
| Set the charger cleaner onto the right end of the transfer charger, gently slide the | ||
|
|
| cleaner to the left end, and then remove it. Repeat this operation two or three times. | |
|
|
|
|
|
|
|
| Slide the charger cleaner from the right end to the left end along the groove of |
|
|
|
|
| |
|
|
| the transfer charger. If the cleaner is stopped on the way, smudges on copies |
|
|
|
| may occur. |
|
|
|
|
|
|
|
|
|
|
|
4 | Return the charger cleaner to its original position. Close the side cover by pressing | |
the round projections near the side cover open button. | ||
|
5 | Turn the power switch on. |
| |
|
|
5
Supplies and user maintenance
31
