71
9
*1 When standard A4 paper is used under the operating conditions.
*2 Feed paper lengthwise only.
*3 Leading and trailing edges.
*4 Along the other edges in totals.
*5 When making multiple duplex copies, the copy speed will vary based on the environment conditions.
*6 Print speed during printing of the second sheet and following sheets when using A4 plain
paper in the tray 1 and performing continuous one-sided printing of the same page.
*7 The first-copy time is measured after the pow er save indicator turns off following power on,
using the document glass with the polygon rotating in the copy ready state and "Selection of
copy start state" set to ON in the user programs (A4), paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient
conditions such as temperature.
*8 Not including TD and drum cartridges.
Bit depth 1 bit or 8 bit/pixel
Sensor Color CCD
Scanning speed Max. 2.88ms/line
Memory 16 MB
Power supply
Local voltage
±
10% (For this copier’s power supply requirement, see
the name plate located on the back of the unit.)
Power consumption Max. 1.0kW
Overall
dimensions
Width 607.6mm 809mm
Depth 462.5mm 492.5mm
Weight
(Approximately) *816.0kg 23.0kg
Unit
dimensions
Width 518.0mm
Depth 462.5mm 492.5mm
Height 295.6mm 465.4mm
Operating conditions Temperature: 10°C to 30°C
Humidity: 20% to 85%
Emulation SHARP GDI
Interface port USB interface (USB 2.0 Full Speed)
Noise level
Sound power level LwA
Copying mode: 6.4B
Standby mode: 3.3B
Sound pressure level LpA (reference) (Bystander positions)
Copying mode: 48dB(A)
Standby mode: 17dB(A)
Sound pressure level LpA (reference) (Operator position)
Copying mode: 52dB(A)
Standby mode: 17dB(A)
Noise emission measurement in accordance with ISO7779.
Emission concentration
(measurement according
to RAL-UZ 62: Edition
Jan. 2002)
Ozone:0.02 mg/m3 or less
Dust:0.075 mg/m3 or less
Styrene:0.07 mg/m3 or less

As a part of our policy of continuous improvement, SHARP reserves the

right to make design and specification changes for product improvement

without prior notice. The performance specification figures indicated are

nominal values of production units. There may be some deviations from

these values in individual units.

AL-2020 AL-2040