LOADING PAPERSpecial papers

Follow these guidelines when using special papers.

●Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended paper may result in misfeeds or smudges on the output. If other than SHARP recommended media must be used, feed each sheet one at a time using the bypass tray (do not attempt continuous copying or printing).

●There are many varieties of special paper available on the market, and

some cannot be used with this machine. Before using special paper, contact a SHARP service center.

● Before using other than SHARP recommended paper, make a test copy to 2 see if the paper is suitable.

LOADING THE PAPER TRAY

Note

Make sure that the paper is not torn, is free of dust, and has no wrinkles

or curled edges.

 

1 Raise the handle of the paper tray and pull the paper tray out until it stops.

2 Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray.

19