CONVENIENT COPY FUNCTIONS

Using the RSPF

1 Place the original(s) in the RSPF. (p.25)

If you place an odd number of originals for one-sided to two-sided copying, the last page will be one-sided.

2

Press the [2-SIDED COPY] key and select the two-sided copy mode that you wish to use.

The mode changes as follows each time you press the [2-SIDED COPY] key:

"1 TO 1" → "1 TO 2" → "2 TO 2" → "2 TO 1"

•"1 TO 2": Two-sided copies from one-sided originals

•"2 TO 2": Two-sided copies from two-sided originals

•"2 TO 1": One-sided copies from two-sided originals

2-SIDED COPY

2 TO 1

3

Press the [ENTER] key.

If you selected "1 TO 2" in step 2, select "LONG EDGE" or "SHORT EDGE" and press the [ENTER] key. LONG EDGE and SHORT EDGE are shown in the illustration on page 30.

4 If you selected "2 TO 1" or "2 TO 2", press the [] key ( ) or [] key () to select the original size and then press the [ENTER] key.

The following original sizes can be selected: "8.5x14", "8.5x13", "8.5x11", "5.5x8.5", "A4", "B5", "A5"

ORIG. SIZE ENTER 5.5x8.5

5 Select the number of copies and any other settings, and then press the [START] key ( ).

The copy will be delivered to the paper output tray.

To cancel automatic two-sided copying, press the [CLEAR ALL] key Note () or press the [2-SIDED COPY] key, select the "1 TO 1", and then

press the [ENTER] key.

32