Sharp AL-2050CS USER SETTINGS

				USER SETTINGS
Program		Setting codes
	Program name	(factory default		Explanation
number		setting appears
		in bold)
			•	This function automatically
				switches the machine to a state
				that consumes even less power
				than preheat mode if the set
				duration of time elapses without
				the machine being used when
		1: 5 MIN.		the power is on. All lights except
				the power save indicator go off.
	AUTO SHUT-OFF	2: 30 MIN.
4		3: 60 MIN.		To resume normal operation,
	TIME
		4: 120 MIN.		press the [START] key (	).
		5: 240 MIN.		Normal operation also resumes
				automatically when a print job is
				received or scanning is begun
				from a computer. While in auto
				power shut-off mode, no keys
				(except the [START] key (	))
				can be used.
			• Use this setting to select the
		1: PATTERN 1		layout pattern when two original
7	LAYOUT IN 2IN1			pages are copied onto a single
		2: PATTERN 2
				sheet of paper (see page 35 for
				the layout patterns).
			•	When enabled, this function
	OFFSET	1: ON		offsets the position of each
8				set of copies in the output tray
	FUNCTION	2: OFF
				in copy mode, and each print
				job in printer mode.
			•	When two-sided copying is
				performed, this function rotates
						7
9	ROTATE ORIG.	1: ON		the image on the back of the
	IMAGE	2: OFF		original. This is convenient
				when binding the copies at the
				top (tablet binding).
			• This setting is used to change
				the copy resolution in AUTO and
10	AE/TEXT	1: 300dpi		TEXT mode from 600 x 300 dpi
	RESOLUTION	2: 600dpi		to 600 x 600 dpi (high-quality
				mode). Scanning is slower
				when high-quality mode is used.

63