Sharp AL-2050CS key, CONVENIENT COPY FUNCTIONS, press the [START] key ( ), then press the [START] key ( ), original and close the RSPF, and

CONVENIENT COPY FUNCTIONS

Using the document glass

1

2

Place the original that you wish to copy onto the front side of the paper on the document glass and close the RSPF.

Press the [2-SIDED COPY] key until "1 TO	2-SIDED	COPY
2" appears, and then press the [ENTER]	1 TO 2
key.

3 Press the [] key ( ) or [] key () to select the binding edge and then press the [ENTER] key.

Select "LONG EDGE" or "SHORT EDGE". The "LONG EDGE" and "SHORT EDGE" are shown in the illustration on the preceding page.

BINDING EDGE LONG EDGE

4	Select the number of copies and any other settings, and then			4
	press the [START] key ( ).
	"[START] : NEXT SCAN [#] : START PRINT" appears and the original is
	scanned into memory.
	To immediately print the scanned image, press the [ ] key.
5	Replace the original with the next
	original and close the RSPF, and
	then press the [START] key ( ).
	Repeat step 5 until all originals have been
	scanned.	1	2
	Copies will be output each time two originals
	have been scanned.
	When the number of original pages is odd	The first original	The second original
	and "[START] : NEXT SCAN [#] : START

PRINT" appears, press the [] key after all pages have been scanned.

•	If you need to clear the data scanned into memory, press the
Note	[CLEAR] key (	). When the [CLEAR] key (		) is pressed, the
	number of copies setting is also cleared.
•	To cancel automatic two-sided copying, press the [CLEAR ALL] key
	( ) or press the [2-SIDED COPY] key, select the "1 TO 1", and then
	press the [ENTER] key.
• If the special function sort mode was selected in step 4, copying will
	not begin until the [		] key is pressed.

31