4 | SPECIAL FUNCTIONS |
|
This chapter describes the special functions of this unit. Use these functions as needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode (page 21)
Reduces toner consumption by approximately 10%.
Power save modes (page 22)
The unit has two power save modes of operation: preheat mode and auto power
Preheat mode
When the unit enters the preheat mode, the power save ( ) indicator will light up |
| |
and other indicators will remain on or off as before. In this condition, the fuser in |
| |
the unit is maintained at a lower heat level, thereby saving power. To copy from | 4 | |
the preheat mode, make desired copier selections and press the start ( | ) key | |
using the normal copying procedure. |
| |
Auto power |
| |
When the unit enters the auto power 
) indicator will light up and other indicators will go out. The auto power 
) key. Then make desired copier selections and press the start ( 
) key using the normal copying procedure.
Auto clear (page 22)
The unit returns to the initial settings a preset amount of time after the end of copy, or scanner job. This preset amount of time (auto clear time) can be changed.
Resolution of AUTO & MANUAL mode (page 22)
You can set the copy resolution used for AUTO and MANUAL ( 
) exposure mode.
TONER SAVE MODE
1 Press the exposure mode selector key
to select the MANUAL ( 
) mode.
21
