Sharp AR-122E N, AR-153E N BYPASS FEED including special paper, The multi-bypass tray AR-153EN

BYPASS FEED (including special paper)

The multi-bypass tray (AR-153EN) or the single bypass (AR-122EN/AR-152EN) can be used to feed standard paper, transparency film, labels, envelopes, and other special purpose paper. Paper measuring from A6 to A4 and in the weight range of 52 to 128g/m2 can be used in this tray. (For paper weighing from 104 to 128g/m2, A4 is the maximum size.)

•The multi-bypass tray (AR-153EN) can hold maximum of 50 sheets of

paper. (Capacity will vary depending on the type of paper loaded.) The single bypass (AR-122EN/AR-152EN) can hold one sheet of paper.

•The original image must be smaller than the paper or media for copying. If the original image is bigger than the paper or media, this may cause smudges on the edges of the copies.

The multi-bypass tray (AR-153EN)

1 Open the multi-bypass tray and extend the tray.

Nota

To close the multi- bypass tray, perform step 1 and then step 2 in the illustration and push the round projections at the right of the tray until they click.

2 Set the paper guides to the paper width. Insert the paper (print face down) all the way into the multi-bypass tray.

Cara de impresión

10