Sharp DV-RW370X operation manual DV dubbing, Guide to DV and On-Screen Display

Recording

DV dubbing

Guide to DV and On-Screen Display

This function helps you to easy dubbing if you have the Digital Video camcorder that has DV output jack. You can control basic operations of the DV from the remote control of this unit such as playback, fast forward or reverse and stop all operations if the DV camcorder is in Playback mode. Use the DV cable that has 4-pin input jack and is compliance with the IEEE 1394 standards. When you connect to DV input jack on the front of this unit, select “AV4” position by using [PROG./] and press [DISPLAY] to show the DV dubbing information for the operating your DV camcorder.

When the DV camcorder

1is in Playback mode...

		1	1	0:00:00	DVD-RW
					Video mode
2
	Control			DVD	DV
	DV Audio			Stereo1	AB-1234
	Start Rec				0:00:00

The menu changes according to what mode of DV Camcorder. Switch the mode on the

DV Camcorder to Playback mode

for the dubbing information.

When the DV camcorder

is not in Playback mode...

1	1	0:00:00	DVD-RW
			Video mode	5
			DV
			AB-1234
			0:22:54

SP 1:35

SP

1:35

3 4

The following instructions are described with the operations using the remote control of this unit.

1 DV icon

2Indicator of active device

•When the “Control” is highlighted, press [ENTER] to display the item selection. Select the device you wish to operate using [Cursor K / L], then press [ENTER] to activate.

•Select “DVD” to control this unit.

•Select “DVC” to control your DV camcorder.

3Recording audio mode

•Other than the DV camcorder is in stop mode, the “DV Audio” can be selected. Press [ENTER] to display the item selection and then using [Cursor K / L] to select the audio you wish to output. Press [ENTER] again to activate.

•Select “Stereo1” to dub the stereo sound.

•Select “Stereo2” to dub the sound with postrecording sound.

•Select “Mix” to dub the Stereo1 and Stereo2.

4Indicator of dubbing function

•When the unit is ready for dubbing, “Start Rec” will appear.

•When the unit is in dubbing, “Pause Rec” will appear.

5Channel position

•When you select “AV4” by using [PROG. / ], “DV” will appear.

6Product name of your DV camcorder

•If the unit cannot recognise the input signal from the DV camcorder or the unknown product, “No Device” will appear instead.

•If the unit receives the input signal from the DV camcorder but the unknown product, “****” will appear instead.

7Status of the current operation and the time counter

•Depending on the DVC's mechanism, the unit's counter and icons may not be displayed the same as DVC shows.

Each icon means:

DVC is in stop mode.

DVC is in playback.

DVC is in pause mode.

DVC is fast forwarding.

(standard speed)

DVC is fast forwarding.

(faster than above)

DVC is fast forwarding.

(faster than above)

DVC is slow forwarding.

(standard speed)

DVC is slow forwarding.

(faster than above)

DVC is slow forwarding.

(faster than above)

7 6

DVC is fast forwarding.

(in stop mode)

DVC is fast reversing.

(in stop mode)

DVC is in reverse playback.

DVC is fast reversing.

(standard speed)

DVC is fast reversing.

(faster than above)

DVC is fast reversing.

(faster than above)

DVC is in slow reverse playback.

DVC is in recording.

DVC is in recording pause mode.

36 EN