Sharp DV-RW370X operation manual Hints for Timer Recording, Priority of overlapped settings

Recording

Timer Recording (cont’d)

Hints for Timer Recording

Before you

•If there is a power failure or the unit is unplugged for more than 1 hour, the clock setting and all timer settings will be lost.

•If there is no disc or an unrecordable disc in the tray, the

icon will flash and the timer recording will not occur. Insert a recordable disc.

•If there is no tape or a tape with a record tab is not in the cassette compartment, the VCR indicator on the front panel flashes and the timer recording cannot be performed. Please insert a recordable tape.

•When all timer recordings are complete, the icon flashes. To play back or eject the recorded disc, press [T-SET], and then press [PLAY B] or [OPEN/CLOSE EJECT A].

•The timer recording cannot be performed in DVD and VCR at the same time. If you set two programmings with the same channel and time both in DVD and VCR, the programming that has priority will be recorded.

•You cannot make any DVD operation during DVD timer recording.

•You cannot make any VCR operation during VCR timer recording.

•If the Start and End times are same, the length of the recording will be set for 24 hours. If the disc or tape becomes full during recording, the unit will turn itself off. To continue recording, press [T-SET]to cancel the timer-standby mode, insert a recordable disc or tape and press [T-SET]again.

•If two or more programmes overlap, “Overlap” and the overlapped programme number will appear on the display.

•If the Start time is earlier and the End time is later than the current time, the recording will start immediately after you press [T-SET].

•If a videotape ends during the timer recording, the unit will automatically stop, eject the videotape, and turn itself off. To continue recording, insert a recordable tape.

start Connections Getting started

Priority of overlapped settings

The unit records programmes according to prior ity if the timer programmes overlap.

Recording

If the starting time is same:

•The timer programming set first (PROG. 1) has priority.

PROG. 1
PROG. 2
Actual	PROG. 1	PROG. 2
recording

Additional 30 seconds (at the most) are cut off.

If the recording time is partially overlapped:

•The timer programming with the earlier start time (PROG. 2) has priority. PROG. 1 will start after PROG. 2 recording is completed.

PROG. 1
PROG. 2
Actual	PROG. 2	PROG. 1
recording

Additional 30 seconds (at the most) are cut off.

Disc Playback

PROG. 2 recording will start after PROG. 1 recording is completed.

If programming has been made at the end of the programming (PROG. 1) currently being recorded:

•The timer programming set first (PROG. 2) has priority. PROG. 3 will not be recorded.

PROG. 1
PROG. 2
PROG. 3
Actual	PROG. 1	PROG. 2
recording

Additional 30 seconds (at the most) are cut off.

PROG. 2 recording will start after PROG. 1 recording is completed.

Note for DVD recording

If the recording time entirely overlaps:

•The shorter timer programming (PROG. 1) is not recorded.

PROG. 1
PROG. 2
Actual	PROG. 2
recording

Changing the Editing Setup menu VCR functions

•If the recording time of two programmes overlap, or the End time of a programme and the Start time of another is same, the first 30 seconds (at the most) of the subsequent programme are cut off.

If the End time of the programme currently being recorded and the Start time of the subsequent pro- gramme are same:

•If PROG. 1 is a DVD recorded programme, the beginning of PROG. 2 may be cut off.

*If the cut off time exceeds 1 minute, the error number “E40” will appear in the Timer Programming list.

PROG. 1

PROG. 2

Actual recording

PROG. 1 PROG. 2

The first 30 seconds (at the most) are cut off.*

Others

EN 33