VCR functions

Other operations

Pressfirst.

To cue or review picture during playback (Picture Search): Press [FWD D / q] or [REV E / r] during playback. Press it again and the unit will search in super high speed.

To freeze the picture on TV screen during playback (Still mode): Press [PAUSE F]. Each time you press the button, the picture will be forwarded frame by frame.

If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing the [PROG. / ].

If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped.

Counter Reset:

Press [CLEAR/C-RESET].

To play back in slow motion:

Press [SLOW ] during playback or the still mode.

If the noise bars appear on the TV screen, you can reduce it by pressing [PROG. / ].

Note

Still / Slow / Pause mode will be automatically cancelled after 5 minutes to prevent damage to the tape and the video head.

To return to play back from the Picture Search / Still / Slow mode, press [PLAY B].

Hi-Fi Stereo Sound System

This unit will record and playback Hi-Fi stereo sound. In addition, it has an AV2 and NICAM stereo sound decoder.

This unit will receive stereo and bilingual broadcasts and it is possible to record in several ways and to play back the sound.

Selecting the Sound Mode

You can select each mode by pressing [AUDIO] on the remote control. Each mode is indicated on the TV screen as following.

During playback of the recorded tape in Hi-Fi mode

During reception of stereo broadcasts

Mode

Audio output

Display on the

TV screen

 

 

Stereo

Stereo

STEREO

L

L audio from both speakers

LEFT

R

R audio from both speakers

RIGHT

Normal

Monaural

-None-

• During reception of bilingual broadcasts

Mode

Audio output

Display on the

TV screen

 

 

Main

Main audio from both speakers

Main

Sub

Sub audio from both speakers

Sub

Main / Sub

• Main audio from the left speaker

Main / Sub

• Sub audio from the right speaker

Note

If you play back non-Hi-Fi tapes, the unit will play back automatically in monaural even if you select any mode.

If the stereo signal becomes weak, the broadcast is automatically recorded in monaural.

90 EN

Page 90
Image 90
Sharp DV-RW370X Other operations, Hi-Fi Stereo Sound System, Selecting the Sound Mode, Mode Audio output Display on