Sharp HT-DV50H Changing the set up menu, Turn on the TV, Turn on the unit by pressing the

Changing the set up menu

		1	Turn on the TV.
		2	Set the TV to the correct input, eg. “AV1”, “VIDEO”, etc.
		3	Turn on the unit by pressing the
			ON/STAND-BY button.
1	2	3	The SHARP startup screen appears.
4	5	6	Note:
7	8	9	Startup screen will be displayed when
			both S-Video cable and SCART cable
0	+10		are connected to the TV. If only the S-
			Video cable is connected, the screen
			may be blank. To set up S-Video mode,
			use video out cable or SCART cable.
		4	Press the SHIFT and SET UP buttons.

5 Press the or button to select a menu.

See the list on pages 24 - 29 for set up menu.

6 Press the , , or button to change the setting and press the ENTER button.

7 After setting is completed, select “EXIT SET UP”, then press the ENTER button to return to the main page.

Notes:

The setting are stored even if the unit is set to stand-by mode. The backup function protects the stored setting for a few hours should there be a power failure or AC power lead disconnection. System set up can be performed during playback mode.

HT-DV40H HT-DV50H

Preparation for Use

23