Sharp HT-DV40H Headphone connection, Timer and sleep operation Remote Control only continued

HT-DV40H HT-DV50H

Advanced Features

Timer and sleep operation (Remote Control only) (continued)

To cancel the sleep operation:

Press the ON/STAND-BY button whilst “SLEEP” is indicated.

To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.

1Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.

2Within 10 seconds, press the or button to select “SLEEP OFF”, and press the MEMORY/DIMMER button.

To use timer and sleep operation together

Sleep and timer playback:

For example, you can fall asleep listening to the radio and wake up to CD the next morning.

1Set the sleep time (see left, steps 1 - 5).

2Whilst the sleep timer is set, set the timer playback (steps 2 - 10, pages 59 - 60).

Sleep timer setting		Timer playback setting		End time
	1 minute - 3 hours			Desired time
	Sleep operation will		Timer playback start time
	automatically stop

Headphone connection

Do not turn the volume on to full at switch on. Listen to music at moderate levels. Excessive sound pressure from earphones and headphone can cause hearing loss.

Before plugging in or unplugging the headphone, reduce the volume.

Be sure your headphone have a 3.5 mm (1/8") diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms.

Plugging in the headphone disconnects the speakers automatically. Adjust the volume using the VOLUME control.

62