Sharp HT-DV40H General control, Basic Operation, To turn the power on, Illumination light control

HT-DV40H HT-DV50H

General control

Basic Operation

Volume

ring

1 2 3

4 5 6

7 8 9

0 +10

To turn the power on

Press the ON/STAND-BY button to turn the power on.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

Illumination light control

Press the MEMORY/DIMMER button for more than 2 seconds to adjust the brightness of the display and volume ring.

Volume ring light and display bright

Volume ring light off and display dim

Volume ring light off and display gets dimmer

Auto power off function

Volume auto fade-in

If you turn off and on the main unit with volume set to 34 or higher, the volume starts at 20 and fades in to the last set level. If you turn off and on the main unit with the volume level set to less than 34, the volume starts at the last level volume setting.

Volume control

Main unit operation:

When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease.

Remote control operation:

Press the VOLUME (+ or –) button to increase or decrease the volume.

0 1... 39 MAX

Subwoofer level control

The subwoofer level can be adjusted.

To increase the level, hold down the

SHIFT button and press the

SUBWOOFER LEVEL + button.

To decrease the level, hold down the	-5 -4 ...+4 +5
SHIFT button and press the

SUBWOOFER LEVEL - button.

Notes:

When sound from the subwoofer is distorted, decrease the subwoofer level.

When changing the subwoofer level, the output level of the SUBWOOFER PRE OUT is also changed.

Function

When the FUNCTION button on main unit is pressed, the current function will change to different mode. Press the FUNCTION button repeatedly to select desired function.

DVD/CD USB TUNER OPTICAL 1

SCART AUX IN OPTICAL 2

Note:

30

In the stop mode of discs/USB operation, the main unit enters the	The backup function will protect the memorised function mode for a
stand-by mode after 15 minutes of inactivity.	few hours should there be a power failure or the AC power lead
	becomes disconnected.