Sharp HT-DV40H Useful operation continued, To change the angle, To zoom images zoom, B button

HT-DV40H HT-DV50H

Useful operation (continued)

DVD Operation

42

To change the angle

You can change the angle of view when playing a DVD disc that contains scenes recorded from multiple angle.

When “ 2 ” is displayed in the upper left corner of the TV screen, press the ANGLE button repeatedly to select the desired angle number.

Notes:

The angle number is not displayed if angles are not recorded on the disc.

Refer to the manual of the disc as the operation may vary depending on the disc.

To zoom images (zoom)

You can zoom in and zoom out the image during playback.

1Whilst a disc is playing, press the ZOOM button.

Each press of the ZOOM button cycles through the zoom setting as belows:

PLAY (Normal play) ZOOM 2 ZOOM 3 ZOOM 4 ZOOM 1/2

ZOOM:OFF ZOOM 1/4 ZOOM 1/3

2To shift the view and display the

desired part of a zoomed image, press the , , or button repeatedly.

To return to normal view:

Press the ZOOM button repeatedly to select “ZOOM:OFF”.

Notes:

Images may become distorted when zoomed. Subtitles cannot be zoomed.

For JPEG ZOOM function, please refer page 49 for details.

To play the contents between the specified points repeatedly (A-B repeat)

WMA

You can play the desired portion repeatedly by specifying it during playback.

1 Whilst a disc is playing, press SHIFT and A				B button
simultaneously.
TV screen		Unit display
	REPEAT A -
		POINT A	4A

This registers the start point (A).

2 Press SHIFT and A B button simultaneously again to enter the end point (B).

TV screen		Unit display
REPEAT A - B
	POINT B 4B		4A B

This starts A-B repeat from the start point (A) to the end point (B).

3 Press SHIFT and A B button simultaneously to return to the normal playback.

Notes:

A-B repeat play is disabled on some discs.

A-B repeat play for DVD is possible only within a chapter. Some scenes on DVD may not allow A-B repeat play.

To select a subtitle or audio language from the disc menu

You can select the desired subtitle or audio language and sound system [Dolby Digital (5.1ch) or Dolby Digital (2ch)] on your DVD if it has disc menu.

1Whilst in the stop or playback mode, press the TOP MENU/MENU button to display the disc menu.

2Press the , , or button to change the setting and press the ENTER button.

Note:

The procedure shown here provides only general steps. The actual procedure for using the disc menu depends on the disc. See the disc jacket for details.