No signal Off, No operation Off | Sharp LC-37HV4M guide

Basic adjustment settings

No signal Off

When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.

1 Press MENU and the TV MENU screen displays.

2 Press c/dto select “Power Control”.

• Power control menu displays.

3 Press a/b to select “No Signal Off”, and then press ENTER.

TV MENU

Power Control

Setup

Power Save	[Manual]


No Signal Off	[Disable]

No Operation Off	[Disable]

No operation Off

When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.

1 Press MENU and the TV MENU screen displays.

2 Press c/dto select “Power Control”.

• Power control menu displays.

3 Press a/bto select “No Operation Off”, and then press ENTER.

TV MENU

Power Control

Setup

Power Save	[Manual]
No Signal Off	[Disable]


No Operation Off	[Disable]

4	Press c/d to select “Enable”, and then	4	Press c/d to select “Enable”, and then
	press ENTER.		press ENTER.

TV MENU

Power Control

No Signal Off

TV MENU

Power Control

No Operation Off

Enable		Disable

Enable		Disable

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

•“Disable” is factory preset value.

•When a TV programme finishes, and the AVC System receives signal input, this function may not operate.

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

• “Disable” is factory preset value.

38

Image 39

Sharp LC-37HV4M operation manual No signal Off, Press a/b to select No Signal Off, and then press Enter, No operation Off

Contents

LC-37HV4M LC-37HV4M Contents Dear Sharp customer Important Safety Precautions Precautions when transporting the Display Important Safety Precautions Supplied accessories Preparation Attaching the speakersExample Attaching right speaker Secure the stand on a platform or the floor How to secure from overturningSecuring from overturning Preparation Setting the System in place Where to place the System AVC System rear view Setting the SystemConnecting the system cable and the AC cord to the Display Removing the terminal cover Cables come out from the small opening Closing the terminal coverCable clamp Large Cable clamp Small Hanging on the wall Setting the Display on the wallSetting the AVC System with the stand Using an optional bracket to mount the Display Inserting the batteries Using the remote control unit Display Part names Part names AVC System Remote control unit Basic connection Connecting to an antennaConnecting to the power outlet Watching TV Turning on the power Turning off the powerWatching TV Simple button operations for changing channels Using Flashback a on the remote control unitUsing CHa/bon the remote control unit Using 0 9 on the remote control unit Mute Simple button operation for changing volume/soundChanging the volume Using eon the remote control unit SRS sound options Watching TV Using hon the remote control unit Watching TV Using Sound on the remote control unit List of AV menu items to help you with operations Basic adjustment settingsAV input mode menu items PC input mode menu items Press c/dto select Yes, and then press Auto installationBasic adjustment settings Press a/bto select Password, and then press Enter Automatic channel searching Automatic channel labellingAutomatic channel sorting Press a/bto select Auto Search, and then press Enter Programme setupPress a/b to select Programme Setup, and then press Enter Auto search Then press Enter Basic adjustment settings Manual setting for each channelProgramme Setup Manual menu Press a/b to select Manual Adjust, Fine tuning Search tuning Labelling menu Colour systemLabelling channels Colour system menu Lock menu Setting the child lockSkipping channels Skip menu Basic adjustment settings Sort Press a/ b to select Programme SetupSort menus Press a/bto select Language, and then press Enter Language setting for on-screen displayPC Input mode AV Input mode Green Picture adjustmentsSelected item Cbutton Dbutton Contrast Red Press a/bto select C.M.S., and then press Basic adjustment settings S. Colour Management SystemPress a/bto select Advanced, and then press Enter Press a/b to select C.M.S., and then press Enter Press a/bto select the desired level, and then press Enter Basic adjustment settings Colour temperature BlackPress a/bto select Colour Temp, and then press Enter Press a/bto select Black, and then press Film mode Basic adjustment settings Monochrome Press a/bto select DNR, and then press Basic adjustment settings SettingPress a/ bto select I/P Setting, and then DNR Digital Noise Reduction Audio adjustment Sound adjustmentSurround Power Control Power control for AV sourcePower save No operation Off No signal OffPress a/b to select No Signal Off, and then press Enter Press c/d to select Enable, and then Press Enter Press Menu and the PC Menu screen displays Basic adjustment settings Power Control for PC sourcePower management Press a/bto select Power Management, and then press Enter AVC System front view Using external equipment Watching a DVD image Using external equipmentConnecting a DVD player For INPUT1 signal DVD player Displaying a VCR image Connecting a VCRFor INPUT2 signal Watching a VCR image Displaying broadcasts via an Hdtv tuner Connecting an Hdtv tunerFor INPUT3 signal Watching broadcasts via an Hdtv tuner Connecting a game console or camcorder Enjoying a game console and viewing camcorder imagesDisplaying an image of the game console or camcorder Displaying an image from a PC Connecting a PCSignal names for 15-pin mini D-sub connecter Viewing an image from a PC Make sure to connect the speaker jack and cable Connecting external speakersWhen using external speakers How to connect the speaker cable Press a/b to select Speaker, and then press Enter Using external equipment Selecting speakers Useful adjustment settings Image position AV input mode onlyDescription Moving the picture on the screen Useful adjustment settings Phase Auto Sync. adjustment PC input mode onlyFine Sync. adjustment PC input mode only For automatically adjusting the PC image Input signal source Input signal settingInput selection Press a/b to select Colour System, and then press Enter Colour system setting AV input mode onlyAV mode selection Signal system of your equipment, and then Wide mode for AV input mode Manual SelectionAuto Selection Wide mode for PC input mode Example Input signal PC input mode onlyPress a/bto select Input Signal and then press Enter Press a/bto select the desired input signal on the display Press a/bto select WSS, and then press Wide screen signalling WSS AV input mode onlyPicture aspect ratio AV input mode only WSS signal 43 screen Mode Normal You can set the orientation of the picture AV input modePC input mode Rotate Press c/d to select Fixed or Variable, and then press Enter Sleep timerAudio out Press a/bto select Audio Out, and then press Enter Press a/bto select Cool Climate, and then press Enter Cool climate Password setting for child lock TV mode only Setting a passwordClearing the password Useful features Dual screen functionsDual screen Press d to exit still image Teletext language settingUseful features Picture and still image Update the still image by pressing Enter Teletext function Useful featuresWhat is Teletext? Teletext mode Subpage screen Useful features Displaying SubpagesDisplaying TOP Overview TOP Overview screen Useful features Time display Troubleshooting Problem Possible SolutionAppendix 72 Hz 75 Hz 85 Hz 800g600 56 Hz 60 Hz 832g624 74.5 Hz PC compatibility chartAppendix 640g400 85 Hz 720g400 70 Hz 640g480 60 Hz 65 Hz PC Control of the System RS-232C port specifications Response code format Commands Part name Part number SpecificationsOptional accessories 37oLCD Colour TV, ModelLC-37HV4M Display Dimensional drawings Dimensional drawings Press a/bto select Auto Installation Press Enter HOW to SET the Factory Presets Sharp Corporation