Using external equipment

Watching a VCR image

Connecting a VCR

You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.

AVC System (rear view)

AV cable (commercially available)

S-video cable (commercially available)

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

PC

TV MENU

Option

Input Select

VCR

Displaying a VCR image

To watch a VCR image, select “INPUT2” from the “INPUT SOURCE” menu using b on the remote control unit or INPUT on the Display.

Then select “INPUT2” on “Input Select” in the menu to set the correct input signal type. (See page 51.)

The setting is stored and can be selected in the “INPUT SOURCE” menu.

NOTE

Each time bis pressed, the input source toggles.

If the VCR image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.

Refer to your VCR operation manual for the signal type.

AUTO

S-Video

Video

(For INPUT2 signal)

42

Page 43
Image 43
Sharp LC-37HV4M operation manual Watching a VCR image, Connecting a VCR, Displaying a VCR image, For INPUT2 signal