Sharp LC-37HV4M Watching a DVD image, Using external equipment, Connecting a DVD player

Using external equipment

Watching a DVD image

Connecting a DVD player

You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment.

Component cable (commercially available)

AVC System (rear view)

When using component cable, select “COMPONENT” for “Input Select” in the menu.

AV cable (commercially available)

S-video cable (commercially available)

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

PC

TV MENU

Option

Input Select

AUTO

COMPONENT

S-Video

Video

(For INPUT1 signal)

DVD player

Displaying a DVD image

To watch a DVD image, select “INPUT1” from “INPUT SOURCE” menu using bon the remote control unit or INPUT on the Display.

Then select “INPUT1” on “Input Select” in the menu to set the correct input signal type. (See page 51.)

The setting is stored and can be selected in the “INPUT SOURCE” menu.

NOTE

•Each time bis pressed, the input source toggles.

•If the DVD image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.

•Refer to your DVD player operation manual for the signal type.

41